Feedback Indicators

Feedback Indicators#

Buzzer control#

../../_shared/_images/wireless-rf-bt/24BUZZ230.png

mute#

../../_shared/_images/wireless-rf-bt/24BUZZ231.png

* high volume#

../../_shared/_images/wireless-rf-bt/24BUZZ232.png

medium volume#

../../_shared/_images/wireless-rf-bt/24BUZZ233.png

low volume#

../../_shared/_images/wireless-rf-bt/24BUZZ234.png

* high pitch#

../../_shared/_images/wireless-rf-bt/24BUZZ235.png

low pitch#

../../_shared/_images/wireless-rf-bt/25ACKBEEP230.png

* SDK voice response off#

../../_shared/_images/wireless-rf-bt/25ACKBEEP231.png

SDK voice response enabled#

../../_shared/_images/wireless-rf-bt/25ACKBEEP232.png

Base connection buzzer prompt switch#

Vibration motor control#

Note

The vibration motor works with a beep prompt, not all models support this feature.

../../_shared/_images/wireless-rf-bt/24MOTO230.png

Disable#

../../_shared/_images/wireless-rf-bt/24MOTO231.png

Enable#

Buzzer sound definition#

TypeSoundDescriptionPreview
Prompt Tone One beep (two tones) Storage mode decode; power-off prompt.
Storage mode decode
Power off
Prompt Tone One beep (three tones) Power-on prompt; setting saved; upload complete.
Power on
Setting saved
Prompt Tone One short beep (same tone) Successful barcode decode.
Successful barcode decode
Prompt Tone Short beeps for 30 seconds Wait for the receiver in 2.4G pairing mode; stops after pairing succeeds.
2.4G pairing
Alarm Tone Two beeps (same tone) Low-battery alarm during decoding.
Low battery
Alarm Tone Three beeps (same tone) Inventory storage error or storage capacity exceeded.
Storage error or capacity alarm
Alarm Tone Transmission failure Alarm when barcode transmission fails. No audio available
Alarm Tone Five beeps (same tone) Power-on failure caused by low battery.
Power-on failed due to low battery

Indicator definition#

Indicator

Status

red light / green light

When charging, the red light is on and the green light is off; when fully charged, the red light is off and the green light is on.

blue light

Following the buzzer action, the buzzer lights up when it sounds and goes out when it does not sound; models that support Bluetooth mode are also used to indicate the Bluetooth connection status.